Jump directly to the section you're interested in learning more about by clicking below:
TR-4050 (4WD)TR-4050 (GM 2WD)
TR-4050 (Ford 2WD)
TR-4050 (4WD)
Gear Ratios:
| Part Number | Input Spline | 1st | 2nd | 3rd | 4th | 5th | Rev |
| TDET17341 | 10 | 6.16 | 3.11 | 1.71 | 1.00 | 0.76 | 6.03 |
TR-4050 (4WD) Dimensions:
A. Input Shaft Length: 6.73"B. Face of transmission to shifter location: 9.50"
C. Height of transmission face: 10.88"
D. Width of transmission face: 11.69"
E. Transmission mount pad from mainshaft centerline: 4.86"
F. Transmission mount pad from face of trans: 17.78"
G. Overall length: 26.19"
TR-4050 (4WD) Features:
1. Reverse Light Switch2. Standard Shifter Position
3. NV4500-style bolt pattern
4. Mounting pad for OEM-style hydraulic slave
5. Transmission mount location
6. Standard 6-bolt circle output flange
7. Case vent tube
8. Fluid fill port
9. Fluid drain port
10. Standard 6-bolt PTO mount location
TR-4050 (4WD) Specifications:
• 5 forward gears• 1 stock shifter position
• 600 lb-ft Torque Capacity
• Max Rated at 5500 RPM
• Single Overdrive
• 10 Spline Input Shaft
• 23 Spline Output
• Hydraulic
• No Speedometer Output
• 6-bolt, right side PTO Provision
• 164 lbs Dry Weight (transmission only), ships freight
• 3.7 qt fluid capacity
Fluid Requirements:
TREMEC HP-MTF, Synchromesh, and Dexron III ATF are the only TREMEC-approved fluids.Back to top
TR-4050 (GM 2WD)
Gear Ratios:
| Part Number | Input Spline | 1st | 2nd | 3rd | 4th | 5th | Rev |
| TDET18574 | 10 | 6.16 | 3.11 | 1.71 | 1.00 | 0.76 | 6.03 |
TR-4050 (GM 2WD) Dimensions:
A. Input Shaft Length: 6.73"B. Face of transmission to shifter location: 9.45"
C. Height of transmission face: 10.88"
D. Width of transmission face: 11.37"
E. Transmission mount pad from mainshaft centerline: 2.5"
F. Transmission mount pad from face of trans: 17.44"
G. Overall length: 27.80"
TR-4050 (GM 2WD) Features:
1. Reverse Light Switch2. Standard Shifter Position
3. 2WD NV4500-style bolt pattern
4. Mounting pad for OEM-style hydraulic slave
5. Transmission mount location
6. 1480 Flange Yoke
7. Optional short throw STX Shifter
8. Case vent tube
9. Fluid fill port
10. Fluid drain port
11. Standard 6-bolt PTO mount location
TR-4050 (GM 2WD) Specifications:
• 5 forward gears• 1 stock shifter position
• 600 lb-ft Torque Capacity
• Max Rated at 5500 RPM
• Single Overdrive
• 10 Spline Input Shaft
• Hydraulic
• Speedometer Output
• 6-bolt, right side PTO Provision
• 170 lbs Dry Weight (transmission only), ships freight
• 3.7 qt fluid capacity
Fluid Requirements:
TREMEC HP-MTF, Synchromesh, and Dexron III ATF are the only TREMEC-approved fluids.Back to top
TR-4050 (Ford 2WD)
Gear Ratios:
| Part Number | Input Spline | 1st | 2nd | 3rd | 4th | 5th | Rev |
| TDET18576 | 10 | 5.81 | 2.94 | 1.61 | 1.00 | 0.77 | 5.69 |
TR-4050 (Ford 2WD) Dimensions:
A. Face of bellhousing to shifter location: 16.99"B. Transmission mount pad from mainshaft centerline: 4.78"
C. First set of mount holes on the transmission mount pad from face of bellhousing: 30.19"
D. Second set of mount holes on the transmission mount pad from face of bellhousing: 31.63"
E. Overall length: 31.68"
TR-4050 (Ford 2WD) Features:
1. Reverse Light Switch2. Standard Shifter Position
3. Bellhousing Included - Ford Modular Engine
4. Mounting pad for the throwout bearing with a clutch fork and hydraulic master cylinder
5. Transmission mount location
6. Standard 4-bolt circle output flange
7. Case vent tube
8. Fluid fill port
9. Fluid drain port
10. 6-bolt PTO mount location
TR-4050 (Ford 2WD) Specifications:
• 5 forward gears• 1 stock shifter position
• 600 lb-ft Torque Capacity
• Max Rated at 5500 RPM
• Single Overdrive
• 10 Spline Input Shaft
• Hydraulic
• No Speedometer Output
• 6-bolt, right side PTO Provision
• 196 lbs Dry Weight (transmission only), ships freight
• 3.7 qt fluid capacity
Fluid Requirements:
TREMEC HP-MTF, Synchromesh, and Dexron III ATF are the only TREMEC-approved fluids.Back to top
