STREET PRO
Part # 75102
$289.50
Specifications
| Make |
|---|
| Ford |
| Applications |
| 2005-10 Mustang 4.6L |
| Spline |
| 1-1/8 x 26 |
| Disc Diameter |
| 11" |
| Disc Material |
| Organic |
| Pressure Plate Style |
| Diaphragm |
| Horsepower Rating |
| 400 |
| Pilot Bushing Included |
| Yes |
| Alignment Tool Included |
| Yes |
| NOTE |
| Applications Made after 01/01/2020 no longer are supplied with a shim to go behind the slave cylinder, because its no longer needed. Make sure to review the latestet instructions, located at the instructions tab below. |
| Item# | Status | Description | Qty. | Your Price | |
|---|---|---|---|---|---|
| 75102 | In Stock | Street Pro: Kit:2005-10 Mustang GT 4.6L:11" x 1-1/16 x 10 |
The Street Pro is the perfect choice for an entry level performance clutch for the street. We recommend it for cars up to 400hp (depending on part number) with mild engine mods and street tires. Included is a high clamp load pressure plate, an organic disc for smooth and even engagement with increased holding power over stock. Our kits are complete with pressure plate, disc, throw out bearing (where applicable) pilot bushing (where applicable) and alignment tool. If you are looking for a clutch that's a great step up from your stock set up, the Silver Sport Transmissions by McLeod Street Pro is the clutch for you.
Items listed in the Kit
- High Clamp Load Diaphragm or Ford Long Style Pressure Plate (Depending on Applications).
- Organic Disc with Sprung Hub (Depending on Applications)
- Mechanical Throw-Out Bearing
- Bronze Oilght Bushing (Depending on Application)
- Plastic Alignment Tool
- Rated for up to 400HP/400TQ at the Crank.
There are no featured galleries matching this product.
- Oil or grease on the clutch facings.
- Worn or damaged clutch linkage, leaf springs, bushings, mounts, u-joints, CV joints, engine mounts, or transmission mounts.
- A flywheel that has not been resurfaced properly, has hot spots, has excessive run-out, and/or incorrect flywheel step.
- Pressure plate or disc that is bent.
- A defective pressure plate and/or disc.
- An engine that is not tuned properly.
- A disc that either lacks enough marcel or has no marcel at all.
1/4 = 15 ft•lbs
5/16 = 25 ft•lbs
3/8 = 35 ft•lbs
8mm = 25 ft•lbs
10mm = 45 ft•lbs
Crank Bolts
7/16 = 65 ft•lbs
1/2 = 70 ft•lbs
10mm = 65 ft•lbs
11mm = 65 ft•lbs
join our
email listYou’ll be first to know about Silver Sport Transmission products, discounts and special events!
Be the first to add a review for this product
Review Product