Magnum Gear Ratios:

Part Number	Style	Release Type	1st	2nd	3rd	4th	5th	6th	Rev
TUET11009	GM	Hyd	2.66	1.78	1.30	1.00	0.80	0.63	2.90
TUET16885	GM	Hyd	2.97	2.10	1.46	1.00	0.80	0.63	2.90
TUET11012	GM	Hyd	2.97	2.10	1.46	1.00	0.74	0.50	2.90
TUET11010	Ford	Mech	2.66	1.78	1.30	1.00	0.80	0.63	2.90
TUET16884	Ford	Mech	2.97	2.10	1.46	1.00	0.80	0.63	2.90
TUET11011	Ford	Mech	2.97	2.10	1.46	1.00	0.74	0.50	2.90

On Ford-style "mechanical units, clutch release provisions are modeled after the T-56 in 2003-2004 Ford Mustang Cobras. On GM-style hydraulic units, clutch release provisions are modeled after the T-56 in 1998-2002 Camaros and Firebirds. Ask your sales representative about the options for your application.

Magnum Dimensions:

A. Input Shaft Length: Ford - 5.70" / GM - 6.52"
B. Face of transmission to stock rear shifter location: 21.05"
C. Face of transmission to stock front shifter location: 17.53"
D. Face of transmission to forward most shifter position (requires SST STX Front Shift Kit - TRA-22140): 13.25"
E. Height of transmission face: 13.00"
F. Width of transmission face: 12.25"
G. Transmission mount pad to mainshaft centerline: 3.08"
H. Transmission mount pad to transmission face: 20.99"
G. Transmission Length: Ford - 34.03" / GM - 34.85"

Magnum Features:

1. Forward Shift Provision (requires SST STX Front Shift Kit - TRA-22140)
2. Standard reversible TREMEC shifter
3. Reverse inhibitor solenoid
4. Fluid fill port
5. Fluid drain port
6. Mechanical speedometer output
7. Common T-56-style bolt pattern
8. Mounting pad for OEM-style hydraulc slave or aftermarket guide tube
9. Clutch fork exit window
10. Slip yoke output
11. Transmission mount location
12. Electronic speedometer output
13. Reverse light switch
14. Vent tube

Magnum Specifications:

• 6 forward gears
• 2 stock shifter position
• 700 lb-ft Torque Capacity
• Max Rated at 7800 RPM
• Double Overdrive
• 26 Spline Input Shaft
• 31 Spline Output
• Hydraulic or Mechanical
• Mechanical & Electronic Speedometer Output
• 140 lbs Dry Weight, ships freight
• 3.66 qt fluid capacity

Fluid Requirements:

TREMEC HP-MTF, Synchromesh, and Dexron III ATF are the only TREMEC-approved fluids.